Search our site

over30yearsgrey

Phone: 248.969.7490

Sales@tecwelding.com

resistanceslide3

X13 Anti-Weld Spatter Coating

PintWhile there are companies that currently market anti-weld spatter coatings, their products are very toxic and can not be used in production environments due to various harmful chemicals. We felt the market was ready for a non-toxic, Low-VOC product that is OSHA friendly, yet affordable enough to use in production.

The X13 Anti-Weld Spatter Paint is a water-based, non-toxic, acrylic coating developed to assist in the cleaning and maintenance of production tooling fixtures, proximity switches/sensors and cables. At a cost of $5 per square foot of X13, the cost to benefit ratio is the economical solution you are looking for.

The X13 has been tested in the harshest of welding environments and proves to be successful at increasing production by reducing downtime and lowering maintenance costs. How does it work?The X13 creates a non-permanent, protective barrier that significantly reduces the amount of heat between weld spatter and any working surface.

When the weld spatter has cooled, simply remove the excess spatter with compressed air, a brush or cloth and reapply to exposed surface – significantly reducing down time associated with weld-spatter removal. 

Where to use

  • Proximity Switches/Sensors
  • Weld Clamps
  • All Electronic Cables
  • Weld Shields
  • Allows you to replace AMPCO copper/bronze with steel coated with X13)
  • Works on all ferrous and non-ferrous metals

Application:

  • Apply the X13 manually using a paintbrush.
  • We recommend using 2 coats in a cross hatch pattern for best results.
  • (1) gallon covers approximately 80 sq. feet.
  • (1) Pint covers approximately 10 sq. feet
  • On average, drying time is approximately 20 to 30 minutes at room temperature, depending on thickness of coat. For best results we recommend two coats with an extended curing time of 6 to 12 hours.

Notes:

  • X13 can be used as a primer or a top coat
  • Shelf-life is approximately 24 months.
  • Mix well - the X13 Anti Weld Spatter is a water based solution that will separate
  • Do not freeze – X13 is water-based
  • MSDS sheets available
  • The X13 is non-toxic with low-VOC.
  • Mix Well